Designed for smaller workshops and other ‘short run' situations, the P200 works with pre-glued tape and you're underway in just a few minutes.
An economical machine for edges from 0.4mm to 2.0mm, the P200 is solid yet compact, and will fit in any workshop.
Please note machine images may show optional equipment.
Make an enquiry about the Felder P200 Edgebander
Flush and radius trimming unit
Depending on the setting, the protruding edge is trimmed flush to the workpiece with two cutters on the upper and lower edges of the workpiece and the finish is executed either with a 2mm radius or 15 degree bevel cutter. The P200 is equipped with a copying pad.
Pneumatic end trimmer
The end trimmer cuts the protruding edges flush to the workpiece at the beginning and end of the workpiece.
Hot-air Blower
3000 W high performance hot air blower. Variable temperature control 20 – 500 Degree C. Temperature display on the thermometer.
| Total input power | 1.2kW (1.6hp) |
|---|---|
| Panel thickness | 10 - 45mm |
| Tape thickness | 0.4 - 2mm |
| Minimum workpiece width | 90mm |
| Air pressure | 6.5 bar |
| Feed speed | 5.5m/min |
| Working temperature | Variable 20 - 500°C |
| Weight | 210kg |
Specifications are subject to change without notice.
P200 Edgebander
|
VTJ Edgebander
|
|
|---|---|---|
| Total input power | 1.2kW (1.6hp) | 3.4kW single phase |
| Weight | 210kg | 70kg |
| Tape thickness | 0.4 - 2mm | 0.4 - 3mm |
| Air pressure | 6.5 bar | 7 bar |
| Feed speed | 5.5m/min | 0 - 5m/min, variable |
| Working temperature | Variable 20 - 500°C | Up to 460°C |
Want to know more? Visit Felder's youtube channel for videos featuring the Felder Group range of machines.
Read about local Felder owners in the Joiners magazine.
P200 at DC Joinery in Stratford, Joiners September 2017
Felder offer woodworking machine specialists for industry, business and hobby use. Tradition – Innovation – Perfection.